Due to the challenging process conditions by heavy duty applications the load capacity of a thermowell must be calculated exactly. Dye penetration tests, ultrasound test, helium leakage test, pressure endurance test as well as various, non-destructive material tests prove the quality of materials and processing.
TW15 is designed for use with resistance and thermocouple thermometers in heavy duty applications.
Modular configuration according to DIN 43772 (form 4/4F) enable a use in all industrial processes with severe thermal and mechanical stresses.
Benefits
Extension, immersion length and total length can be chosen according to process requirements
A wide choice of dimensions, materials and process connections is available
Special versions can be manufactured according to customer requirements
The process connection can either be weld-in or flanged
Our non-invasive thermometer can be easily retrofitted to the existing pipe and integrated into the control system to enable efficient stand-by operation of a turboset.
Since the temperature of compressed hydrogen increases with expansion during filling, temperature measurement is essential at hydrogen filling stations for safety reasons.
The Ziegler-Natta process uses hazardous chemicals like titanium tetrachloride. Precise temperature measurement is crucial to prevent runaway reactions and ensure safety and efficiency.
To meet the challenges of temperature monitoring in such critical processes, a thermowell design has been developed that responds to process changes up to five times faster than standard designs.
According to DIN43772 form 4.
From round barstock, diameter 50mm,
L=50mm.
Welding socket can, if a fitting
thermowell (DIN43772 form 4) is also
ordered, be welded to the thermowell be
delivered.
According to DIN43772 form 4.
From round barstock, diameter 50mm,
L=50mm.
Welding socket can, if a fitting
thermowell (DIN43772 form 4) is also
ordered, be welded to the thermowell be
delivered.
According to DIN43772 form 4.
From round barstock, diameter 50mm,
L=50mm.
Welding socket can, if a fitting
thermowell (DIN43772 form 4) is also
ordered, be welded to the thermowell be
delivered.
